drywall taper
Posted on July 07, 2026 by a licensed third-party for Employer details OG Express Taping
Job details
Education: Secondary (high) school graduation certificate. Tasks: Apply successive coats of compound and sand seams and joints. Cut and install metal corner beads to protect exterior corners. Fill joints, nail indentations, holes and cracks with joint compound using trowel and broad knife. Smooth out excess compound and allow coat to dry. Tape over joints using taping machine and embed tape in compound. Employment terms options: Early morning. Experience: 2 years to less than 3 years. Employment terms options: Morning. Day.- Location Edmonton, ABT5E 4M4
- Work location On site
- Salary$38.00HOUR hourly / 40 hours per week
- Terms of employment Permanent employmentFull time
- Early morning, Morning, Day
- Starts as soon as possible
- vacancies 2 vacancies
- Source Job Bank #3611052
Overview
Languages
English
Education
- Secondary (high) school graduation certificate
Experience
2 years to less than 3 years
On site
Work must be completed at the physical location. There is no option to work remotely.
Responsibilities
Tasks
- Apply successive coats of compound and sand seams and joints
- Cut and install metal corner beads to protect exterior corners
- Fill joints, nail indentations, holes and cracks with joint compound using trowel and broad knife
- Smooth out excess compound and allow coat to dry
- Tape over joints using taping machine and embed tape in compound
Who can apply for this job?
You can apply if you are:
- a Canadian citizen
- a permanent resident of Canada
- a temporary resident of Canada with a valid work permit
Do not apply if you are not authorized to work in Canada. The employer will not respond to your application.
Advertised until
2026-08-10
Important notice: This job posting was posted directly by the employer on Job Bank. The Government of Canada has taken steps to make sure it is accurate and reliable but cannot guarantee its authenticity.
Report a problem with this job posting
Page details
- Date modified: