drywall installer and finisher
Verified
Posted on April 17, 2024
by
Employer details
Torca 1 Inc.
Job details
Education: Secondary (high) school graduation certificate. Work site environment: Noisy. Outdoors. Work setting: Construction. Tasks: Apply successive coats of compound and sand seams and joints. Cut and install metal corner beads to protect exterior corners. Fabricate and install suspended metal ceiling grids and place in panels to form acoustical and coffered ceilings. Fill joints, nail indentations, holes and cracks with joint compound using trowel and broad knife. Measure, cut, fit and install drywall sheets. Mix plaster ingredients to desired consistency. Position and secure sheets to metal or wooden studs or joists. Smooth out excess compound and allow coat to dry. Spray acoustic or texture materials over walls and ceilings. Tape over joints using taping machine and embed tape in compound. Install corner beads and wire mesh around beams to which plaster is to be applied. Install metal stud framing and furring for interior drywall or plaster walls and ceilings, using hand and power tools. Read and interpret blueprints, maps, drawings and specifications. Work at heights, on scaffolding or swing stages. Erect and install scaffolding, falsework and other working platforms. Work conditions and physical capabilities: Bending, crouching, kneeling. Hand-eye co-ordination. Manual dexterity. Physically demanding. Repetitive tasks. Standing for extended periods. Work under pressure. Personal suitability: Dependability. Flexibility. Judgement. Reliability. Team player. Experience: 2 years to less than 3 years.
-
LocationElk Point, AB
-
Salary$27.00HOUR hourly / 30 to 40 hours per week
-
Terms of employment
Permanent employmentFull time
-
Day, Evening, Night, Weekend, Overtime, Morning
- Start date
Starts as soon as possible
- vacancies
10 vacancies
-
Verified
- Source
Job Bank
#2876675
Overview
Languages
English
Education
-
Secondary (high) school graduation certificate
Experience
2 years to less than 3 years
Work site environment
Work setting
Responsibilities
Tasks
-
Apply successive coats of compound and sand seams and joints
-
Cut and install metal corner beads to protect exterior corners
-
Fabricate and install suspended metal ceiling grids and place in panels to form acoustical and coffered ceilings
-
Fill joints, nail indentations, holes and cracks with joint compound using trowel and broad knife
-
Measure, cut, fit and install drywall sheets
-
Mix plaster ingredients to desired consistency
-
Position and secure sheets to metal or wooden studs or joists
-
Smooth out excess compound and allow coat to dry
-
Spray acoustic or texture materials over walls and ceilings
-
Tape over joints using taping machine and embed tape in compound
-
Install corner beads and wire mesh around beams to which plaster is to be applied
-
Install metal stud framing and furring for interior drywall or plaster walls and ceilings, using hand and power tools
-
Read and interpret blueprints, maps, drawings and specifications
-
Work at heights, on scaffolding or swing stages
-
Erect and install scaffolding, falsework and other working platforms
Additional information
Work conditions and physical capabilities
-
Bending, crouching, kneeling
-
Hand-eye co-ordination
-
Manual dexterity
-
Physically demanding
-
Repetitive tasks
-
Standing for extended periods
-
Work under pressure
Personal suitability
-
Dependability
-
Flexibility
-
Judgement
-
Reliability
-
Team player
Who can apply to this job?
The employer accepts applications from:
- Canadian citizens and permanent or temporary residents of Canada.
- Other candidates with or without a valid Canadian work permit.
Advertised until
2024-05-17
Important notice: This job posting was posted directly by the employer on Job Bank. The Government of Canada has taken steps to make sure it is accurate and reliable but cannot guarantee its authenticity.
Report a problem with this job posting
Thank you for your help!
You will not receive a reply. For enquiries, please contact us.